Release Notes

Introduction 

The release notes provide brief and high-level descriptions of the new features of HaloCAD. Before installing HaloCAD, it is recommended to read the release notes to understand any current limitations or bugs that may apply to this version of the software.

Product Description

HaloCAD acts as the guardian of your CAD files by automatically protecting them with Microsoft Purview Information Protection (MPIP) labels whenever they leave your secure IT perimeter. As a plug-in for CAD applications, HaloCAD offers access to MPIP-protected files, including label handling and privilege enforcement. CAD users will not notice any differences in the handling of CAD files because protection takes place in the background. By seamlessly attaching MPIP labels to the CAD files while they are being created, it provides end-to-end security for those files.

System Requirements

The following system requirements table specifies the minimum and recommended technical specifications, such as software and network resources, necessary to run the product.

Requirements

Supported Autodesk applications for HaloCAD Add-ons

You are reading the current version of the release notes; however, if you are searching for a previous version, refer to the release notes for that version.

Autodesk applications and HaloCAD Add-on version

Prerequisites

The following preparatory steps or conditions must be met before installing the product.

The add-on requires the registration of an application with Microsoft Entra ID, an Office 365 subscription, and access to recommended URLs. For additional information, please refer to the Technical Reference Manual.

Code Quality and Security

Secude focuses on software quality and security. This is accomplished by adhering to and exceeding best practices in development, testing, and quality control. Secude has chosen SonarQube as the first building block for building and implementing a robust continuous code quality assurance (QA). SonarQube is a platform for statical code analysis for continuous inspection of code quality. It performs automatic reviews of code to detect bugs, code smells, unit test coverage, and security issues in 29 programming languages.

SonarQube is utilized throughout the development process at Secude and only the highest marks are accepted for a product to be released. It helps to regulate code quality from the beginning of development, find and repair issues promptly, and improve overall software stability.

Each build report can be found under its relevant version heading in this release notes.

Reliability Rating 

• A = 0 Bugs

• B = at least 1 Minor Bug

• C = at least 1 Major Bug

• D = at least 1 Critical Bug

• E = at least 1 Blocker Bug

Security Rating

• A = 0 Vulnerabilities

• B = at least 1 Minor Vulnerability

• C = at least 1 Major Vulnerability

• D = at least 1 Critical Vulnerability

• E = at least 1 Blocker Vulnerability

Security Review Rating 

The Security Review Rating is a letter grade based on the percentage of Reviewed (Fixed or Safe) Security Hotspots.

• A = >= 80%

• B = >= 70% and <80%

• C = >= 50% and <70%

• D = >= 30% and <50%

• E = < 30%

Maintainability Rating 

A=0-0.05, B=0.06-0.1, C=0.11-0.20, D=0.21-0.5, E=0.51-1

The Maintainability Rating scale can be alternately stated by saying that if the outstanding remediation cost is:

• <=5% of the time that has already gone into the application, the rating is A

• between 6 to 10% the rating is a B

• between 11 to 20% the rating is a C

• between 21 to 50% the rating is a D

• anything over 50% is an E

Build 2.2

New Features

This section highlights the new features in the current release.

Implemented a new feature that allows users to configure and display watermark text on RVT files as custom metadata using the HaloSHARE application. By default, HaloSHARE-watermarked text appears diagonally on a file, however, the Revit application does not allow diagonal watermarking, therefore, the watermark is displayed horizontally. The Revit Lookup tool is required to view the custom properties (metadata) in the Revit application. After applying the watermark, navigate to the Add-Ins tab > click on the RevitLookup > Dashboard > Schemas > HaloMetadataInfo > GetElements > GetEntity (Schema) > Get (). HCADRVT-131

Improvements

This section lists improvements added to the current release.

1. Support has been added for masking or allowing clear text visibility of Personally Identifiable Information (PII) in the MIP SDK logs using the registry key mipallowpii. HCADRVT-136

2. As of the previous release, watermark text was displayed horizontally by default, despite the label being configured to display the watermark diagonally. However, from this release, watermark text will be shown diagonally, as configured. HCADRVT-147

Fixed Issues

This section provides a list of the fixed issues in the current release.

1. Fixed an issue that prevented the HaloCAD least permission popup from displaying when using the Insert -> Import CAD option to import protected OBJ and STL files into an unprotected Revit file. HCADRVT-127

2. Fixed an issue that prevented the file from being protected when exporting a protected file from a mapped network location using the Save As or Export options. HCADRVT-152

Known Issues 

This section describes the known issues with the current release.

1. While exporting a protected file using the Show Rendering Dialog option without export rights, the drawing gets saved as a black screen. HCADRVT-41 

2. When exporting from a Revit file, a protected image file is exported with a “.p" extension, such as .ppng, .pbmp, .ptif, or .pjpg. HCADRVT-85

3. When a file is imported using the "Link PDF/ Import PDF" option, the Protected PDF file is not decrypted and appears as "Microsoft Azure Information Protection". HCADRVT-84

4. When DKE files are available in recent documents and the DKE service is turned off, it takes longer to launch the Revit application and display the HaloCAD error restriction popup. HCADRVT-129

Quality Gate Report

Please see the table below for a list of SonarQube's key parameters for this version. Refer to the "Code Quality and Security" section for more information on rating definitions.

Quality Gate report